Unisex Slouchy Beanie

New Pattern!

What you will need:
1 skein yarn. Yarn of your choice, I used worsted weight which I bought from www.fb.com/baguioyarns.com 3.50 oz / 100 g
length: 209 yd / 191 m
- crochet hook size I 5.5 mm
- crochet hook size J 6.00 mm
- crochet hook size 7.00 mm
- crochet hook size 8.00 mm

- yarn needle


Purchase the pattern now! =)

http://www.ravelry.com/patterns/library/beanies-2

Multi-Purpose Crochet Blanket, Curtain or Table Cloth

SKILLS LEVEL:
Easy

MATERIALS:
Baguio Yarns (1 ball each)

• Violet (A)
• Lavander (B)
• Pistachio (C)
• Brink Pink (D)
• Fuchsia (E)
• True Blue (F)

Size 5.0mm Crochet Hook

MEASUREMENT:

Approximately 64" wide x 58" long

NOTE:

To change color, work last stitch of old color to last yarn over. Yarn over with new color and draw through all loops on hook to complete stitch. Fasten off old color and continue working with new color.

Easy Slouch Beanie

Level: Easy

Materials: 4-5 Shade 99 18g earch Monaco Acrylic Yarn

                   Size J Hook

ABBREVIATIONS:

yo - yarn over

ch - chain

dc - double crochet

sl st - slitch stitch

sc - single crochet

Stitch Note:

DECREASE: Yo, pull up loop, yo, pull through two loops, yo, pull up loop in the next stich, yo, pull though two loops, yo, pull through all remaining loops.

Ch 3 and sl st in first stich to form a ring.

Round 1: Ch 3 (turning chain counts as first dc here & thoughout), dc in center of ring 11 times (12 total). Join with sl stich in turning chain.

Round 2: Ch 3, dc in same space (increase made), 2 dc in each stitch around ending with sl st in turning chain.

Round 3: Ch 3, *2 dc in next space, 1 dc in next space*, continue from * to * ending with sl st in turning chain.

Round 4: Ch 3, 1 dc in next space, *2 dc in next space, 1 dc in next 2 spaces*, continue from * to * ending with sl st in turning chain.

Round 5: Ch 3, 1 dc in next 2 spaces, *2 dc in next space, 1 dc in next 3 spaces*, continue from * to * ending with sl st in turning chain.

Round 6: Ch 3, 1 dc in next 3 spaces, *2 dc in next space, 1 dc in next 4 spaces*, continue from * to * ending with sl st in turning chain.

Round 7: Ch 3, 1 dc in next 4 spaces, *2 dc in next space, 1 dc in next 5 spaces*, continue from * to * ending with sl st in turning chain.

Round 8: Ch 3, 1 dc in next 5 spaces, *2 dc in next space, 1 dc in next 6 spaces*, continue from * to * ending with sl st in turning chain.

Round 9: Ch 3, 1 dc in next 6 spaces, *2 dc in next space, 1 dc in next 7 spaces*, continue from * to * ending with sl st in turning chain.

Rounds 9 - 10: Ch 3, 1 dc in each stich around (WORK EVEN) (For slouchier hat...work more even rounds here).

Round 11: Ch 3, 1 dc in next 5 spaces, *dc decrease in next 2 stitches, 1 dc in next 6 spaces*, continue from * to * ending with sl st in turning chain.

Round 12: Ch 3, 1 dc in next 4 spaces, *dc decrease in next 2 stitches, 1 dc in next 5 spaces*, continue from * to * ending with sl st in turning chain.

Round 13: Ch 3, 1 dc in next 3 spaces, *dc decrease in next 2 stitches, 1 dc in next 4 spaces*, continue from * to * ending with sl st in turning chain.

Round 14: Ch 3, *1 dc in next 7 spaces, dc decrease (see above) in next 2 stitches, 1 dc in next 6 spaces*, continue from * to * ending with sl st in turning chain.

Round 15 -19: Ch 2 (counts as first sc), sc in each stitch across.

MODIFICATIONS:

- You can make this hat "slouchier" by increasing the number of rows you work even.

- You make smaller (child) size, work up to row (or 7), then work even 2 rounds. Then work work rows 12 (or 13).

Garps’ Slouchy Beanie

MATERIALS

● Size 4.50mm (G) crochet hook
● “Monaco” acrylic yarn (4 – 5 balls)

ABBREVIATIONS

ch – chain

sc – single crochet

dc – double crochet

st – stitch

sl st – slip stitch

beg – beginning

dc2tog – double crochet 2 stitches together

GAUGE

18 dc’s = 4″

BERET

ch 4, join with a sl st to form a ring.

Rnd1: Ch 2, 9 dc’s in ring, join with a sl st in top of beg ch-2 – (9 dc)

Rnd2: Ch 2, 2dc in each st around, join with sl st in top of beg of ch-22 (18 dc)

Rnd3: Ch 2, 2dc in first stitch, 1dc in next stitch, repeat around, join with sl st in top of beg of ch-2 (27dc)

Rnd4: Ch 2, 2dc in first st, 1 dc in next 2 sts, repeat around, join with sl st in top of beg of ch-2 (36 dc)

Rnd5: Ch 2, 2dc in first st, 1 dc in next 3 sts, repeat around, join with sl st in top of beg of ch-2 (45 dc)

Rnd6: Ch 2, 2dc in first st, 1 dc in next 4 sts, repeat around, join with sl st in top of beg of ch-2 (54 dc)

Rnd7: Ch 2, 2dc in first st, 1 dc in next 5 sts, repeat around, join with sl st in top of beg of ch-2 (63 dc)

Rnd8: Ch 2, 2dc in first st, 1 dc in next 6 sts, repeat around, join with sl st in top of beg of ch-2 (72 dc)

Rnd9: Ch 2, 2dc in first st, 1 dc in next 7 sts, repeat around, join with sl st in top of beg of ch-2 (81 dc)

Rnd10: Ch 2, 2dc in first st, 1 dc in next 8 sts, repeat around, join with sl st in top of beg of ch-2 (90 dc)

Rnd 11 – 17 : Ch 2, 1 dc in each stitch around (90 dc)

Rnd18: Ch 2, dc2tog, 1 dc in next 7 st, repeat around, join with sl st in top of beg ch-2 (81dc)

Rnd 19 – 20: Ch 2, 1dc in each stitch around (81 dc)

Rnd 21: Ch 2, dc2tog 1 dc in next 6 st, repeat around, join with sl st in top of beg ch-2 (72 dc)

Rnd 22 – 23: Ch 2, 1 dc in each stitch around (72 dc)

Rnd 24 – 27: Ch 1, sc in next 72 st, join with sl st (72 sc). Fasten off.

Don’t crochet the last 4 rows too tightly or it will not fit.

My Accidental Beret

Since this is my first post for this blog, i’m sharing this free pattern i originally made.

MATERIALS

● Size 4.50mm (G) crochet hook
● “Monaco” acrylic yarn (4 – 5 balls)

ABBREVIATIONS

ch – chain

sc – single crochet

dc – double crochet

hdc – half double crochet

ea – each

st – stitch

sl st – slip stitch

rep – repeat

beg – beginning

yo – yarn over

FO – finish/fasten off

GAUGE

18 dc’s = 4″

STITCH GLOSSARY

FPDC (Front Post Double Crochet)

Yo, insert hook from front to back to front again around post of st, yo and draw up a loop, (yo and draw through 2 loops on hook) twice

BERET

ch 4, join with a sl st to form a ring.

Rnd1: Ch 3 (counts as 1 dc), 10 dc’s in ring, join with a sl st in top of beg ch-3 – 11 dc.

Rnd2: Ch 3 (counts as 1 hdc), hdc in same st, 2 hdc’s in each dc around, join with sl st in top of beg of ch-3 – 22 hdc’s.

Rnd3: Rep Rnd 2, dc instead of hdc in this round – 44dc’s

at the end of this round, i will stop the counting since it will be more confusing. just follow your st. it’s okay to make mistakes, you can always correct them.

Rnd4: Ch 3 *FPDC on the next dc, dc on the next st, skip 1 dc, rep from *, join with sl st in top of beg og ch-3

Rnd5: Ch 3 (counts as 1 dc) dc on the same st, *FPDC on next dc, dc on the next 2 st, rep from *, join with a sl st in top of beg of ch-3.

Rnd6: Ch 3 (counts as 1 dc) dc on the same st, dc on the next st, * FPDC on the next dc, dc on the same st, dc on the next 2 st, rep from *, join with sl st in top of beg of ch-3 – (3 dc’s between FPDC)

Rnd7: Ch 3 (counts as 1 dc) dc on the same st, dc on the next 2 st, *FPDC on the next dc,  dc on the same st, dc on the next 3 st, rep from *, join with a sl st in top of beg  ch-3 – (4dc’s between FPDC)

Rnd8: Ch 3 (counts as 1 dc) dc on the same st, dc on the next 3 st, *FPDC on the next dc,  dc on the same st, dc on the next 4 st, rep from *, join with a sl st in top of beg ch-3 – (5dc’s between FPDC)

Rnd9: Ch 3 (counts as 1 dc) dc on the same st, dc on the next 4 st, *FPDC on the next dc,  dc on the same st, dc on the next 5 st, rep from *, join with a sl st in top of beg ch-3 – (6dc’s between FPDC)

Rnd10: Ch 3 (counts as 1 dc) dc on the same st, dc on the next 5 st, *FPDC on the next dc,  dc on the same st, dc on the next 6 st, rep from *, join with a sl st in top of beg ch-3 – (7dc’s between FPDC)

Rnd11: Ch 3 (counts as 1 dc) dc on the same st, dc on the next 6 st, *FPDC on the next dc,  dc on the same st, dc on the next 7 st, rep from *, join with a sl st in top of beg ch-3 – (8dc’s between FPDC)

Piece should measure approximately 11″ across.

Rnd12: Ch 3 (counts as 1 dc) skip 1 space

the skipping of spaces in this round is intended for the beret to curl up.

*FPDC, dc on the same st, skip 1 space, dc on the next next space, rep from *, join with a sl st in top beg ch-3.

don’t mind the pattern. just skip one space after a dc and just keep in mind that 1 FPDC is between a dc

TIP: FPDC in line with the previous FPDC of the previous round.

Rnd 13, 14, 15: Rep procedure in rnd12 until there’s only 2 dc in between 2 FPDC.

Rnd 16, 17, 18, 19: Ch 1 (counts as 1 sc) sc around each st, join with a sl st in beg of ch 1. Fasten off.